facebook twitter blog youtube linkedin
Solar panel manufacturing equipment
Solar Panel Manufacturing Equipment
Home /

Solar Panel Manufacturing Equipment

/Thin Film Solar Module IV Tester and Sun Simulator

Thin Film Solar Module IV Tester and Sun Simulator

The 150 ms AAA Solar Module Simulator is designed for IV testing of PERC and thin-film solar modules. Combining simulated sunlight and precise electrical performance measurement, it evaluates key parameters such as Pmax, Voc, Isc, Vmp, and Imp. It provides a reliable testing solution for solar module performance evaluation and quality control in PV manufacturing.
  • Item NO.:

    YHPT-AAA
  • Product Details

150mS Perc Cell Solar Module Simulator

Application

Mainly used for automatic performance testing and test result recording of the following photovoltaic modules:

  1. Monocrystalline Silicon Solar Modules

  2. Polycrystalline Silicon Solar Modules

  3. Thin-Film Solar Modules

Suitable for solar module performance testing and quality inspection in photovoltaic manufacturing.

Products Features:

1. Flash Duration Adjustment

Adjustable flash impulse duration: 0–60 ms.

2. Data Acquisition System

Four-wire measurement system equipped with a 14-bit, 4-channel high-speed synchronous data acquisition card, supporting 8,000 data acquisition points.

3. Measurement Display

Displays 10 measurement parameters, with test results presented in both tabular and graphical formats.

4. Automatic Compensation

Automatic irradiance compensation and automatic temperature compensation.

5. Voice Alerts and Flash Counter

Voice announcements and prompts for flash counts, with flash time counting and reminder functions.

6. Continuous Operation and Xenon Lamp Service Life

Supports continuous operation for 24 hours. The imported xenon lamp has a rated service life of 300,000 flashes.

7. Design and Components

Patented design incorporating high-quality key components.

8. Control System

Touchscreen control interface for convenient equipment operation.

9. Safety Cabinet

Independent explosion-proof control cabinet.

10. Computer Configuration

Dell computer.

Technical Data:

Model

YHMT-AAA

Lamp Spectrum

In line with IEC60904-9:2007(A Grade)

Light Intensity

1000W/m²(700W/m²-1200W/m²)

Light intensity non-uniformity

≤±2%[A]

Instability degree of irradiation

≤±2%[A]

Test results consistency

≤±0.5%[A]

Test error of electrical properties

≤1% A

Single flash time

150ms

Effective Test Range

2000mm×1500mm/20W~500W

Measuring Voltage

0-200V(Resolution 1mV)

Measuring current

200mA-20A(Resolution 1mA)

Environmental temperature

15℃~30℃

Test Parameters

Isc, Voc,Pmax, Vm,Im,FF,EFF,Temp,Rs,Rsh

power

220V/50Hz(60Hz)


Key Features and Functions

1. Comprehensive Electrical Performance Measurement

Measures key solar module electrical parameters, including I-V curves, short-circuit current (Isc), open-circuit voltage (Voc), peak power (Pmax), maximum power point voltage (Vmp), maximum power point current (Imp), current at fixed voltage, fill factor (FF), conversion efficiency, light intensity, and ambient temperature.

2. Automatic Classification and Digital Display

Automatically classifies solar modules according to preset voltage and current criteria. Test results and classification grades are displayed directly on the test cabinet through a digital display, making operation convenient for production line applications.

3. Four-Wire Measurement Connection

Uses a four-wire measurement connection to the solar module to improve current measurement accuracy and reduce measurement errors.

4. Simultaneous Temperature and Light Intensity Measurement

Measures temperature and light intensity simultaneously to support automatic compensation for variations in solar module temperature and light intensity, improving measurement accuracy.

5. Flexible Compensation and Calibration System

Features a self-tuning system with manual compensation parameter input, automatic or manual temperature compensation, and automatic light intensity compensation to support flexible test adjustments and measurement correction.



Got Free Inquiry Now
We will contact you as soon as possible!
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Related Products

Suposolar is a group company have been engaged in solar PV module manufacturing solutions for more than 15 years focus on serving small and medium factories in PV Industry.
Solar Cell Scribing Machine – 20W

Solar Cell Fiber Laser Scribing Machine – 20W

20W Solar Cell Fiber Laser Scribing Machine The 20W Solar Cell Fiber Laser Scribing Machine is designed for precision laser scribing and cutting applications in photovoltaic cell manufacturing. Using fiber laser technology, the machine performs controlled laser processing on solar cells to achieve accurate scribing and cell separation according to different production requirements. With a non-contact laser processing method, the equipment helps reduce mechanical stress on solar cells during processing while providing consistent scribing quality. The 20W fiber laser system is suitable for specialized solar cell processing applications where precision, process stability, and reliable production performance are essential. Designed for photovoltaic manufacturing processes, this solar cell laser scribing machine provides an efficient solution for PV manufacturers requiring precision solar cell scribing, laser cutting, and cell segmentation operations.

Solar Cell Testing Machine

Solar Cell Testing Machine AAA

Solar Cell Testing Machine AAA  

PV Ribbon Cutting and Bending Machine

PV Ribbon Cutting and Bending Machine

The LC-100SX PV Ribbon Cutting and Bending Machine is designed for automatic cutting and bending of solar tabbing ribbons and busbar ribbons. Compatible with 5BB–20BB solar cells, it features adjustable ribbon winding speed, a production capacity of up to 120 pcs/min, and quick changeover for different cutting lengths and ribbon materials. Equipped with an automatic output counter, this standalone machine offers convenient operation and maintenance-free performance for photovoltaic module manufacturing.

Automatic Solar Cell IV Testing and Appearance Inspection & Sorting Machine

Automatic Solar Cell IV Testing and Appearance Inspection & Sorting Machine

Application & Compatibility Cell Size: Compatible with 156–220 mm polycrystalline and monocrystalline solar cells. Cell Type: Supports 2BB–6BB, 9BB, and 12BB polycrystalline and monocrystalline solar cells. Cell Warpage: Maximum warpage ≤ 3 mm. Cell Quality: Suitable for A-grade solar cells, with a pass rate of over 98%.

PV Ribbon Cutting Machine

Ribbon Cutting Machine

YS-100 Ribbon Cutting Machine

Automatic Solar Ribbon Cutting and Bending Machine

Automatic Solar Ribbon Cutting and Bending Machine

1. 4-Type Ribbon Cutting and Bending: Supports four types of solar ribbon cutting and bending to meet different production requirements. 2. Wide Cell Compatibility: Suitable for solar ribbons used with 5BB–20BB solar cells. 3. Adjustable Winding Speed: The winding speed can be adjusted according to production requirements. 4. High Production Efficiency: The machine achieves a cycle time of up to 120 pcs/min. 5. Quick and Easy Adjustment: Cutting dimensions and material types can be changed quickly and easily. 6. Automatic Output Counter: Equipped with an automatic counting function to track production output. 7. Maintenance-Free Design: Designed for maintenance-free operation. 8. Standalone Operation: Independent standalone unit for flexible installation in solar panel production lines.

chat Now Request A Free Quote
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!