facebook twitter blog youtube linkedin
Solar panel manufacturing equipment
Solar Module IV Tester
Home /

Solar Module IV Tester

/Perc and Thin Film Cell Solar Module Simulator

Perc and Thin Film Cell Solar Module Simulator

150mS AAA Perc Perc and Thin Film Solar Module Simulator 
  • Item NO.:

    YHPT-AAA
  • Product Details

150mS Perc Cell Solar Module Simulator


Application:


Mainly used in automatic test and result record of solar

mono-crystalline silicon, poly-crystalline silicon solar cell

module and thin-film module.


Products Features:


1. Flash impulse continuous adjustable range 0-60ms       

2. Four-line measurement; 14-bit 4-channel high-speed synchronous acquisition card, 8000 data collecting point;     

3. 10 parameters display;measured parameter display in tabulation and graphic way;            

4. Irradiance automatically compensating; temperature automatically compensating;           

5. Voice counts off and prompts of flash time;counting prompts of flash time     

6. 24 consecutive hours of work, working life of imports Xenon lamp is 300,000 times of flash

7. Patented Design with high quality key components

8. Touch-screen control

9. Independent explosion proof control cabinet 

10.Dell Computer

 

Technical Data:

 

Model

YHMT-AAA

Lamp Spectrum

In line with IEC60904-9:2007(A Grade)

Light Intensity

1000W/m²(700W/m²-1200W/m²)

Light intensity non-uniformity

≤±2%[A]

Instability degree of irradiation

≤±2%[A]

Test results consistency

≤±0.5%[A]

Test error of electrical properties

≤1% A

Single flash time

150ms

Effective Test Range

2000mm×1500mm/20W~500W

Measuring Voltage

0-200V(Resolution 1mV)

Measuring current

200mA-20A(Resolution 1mA)

Environmental temperature

15℃~30℃

Test Parameters

Isc, Voc,Pmax, Vm,Im,FF,EFF,Temp,Rs,Rsh

power

220V/50Hz(60Hz)

 

Function Festures:


1. Measurable parameters: I-V curve, short circuit current, open circuit voltage, peak power, peak power point voltage, current, fixed voltage current, filling factor, conversion efficiency, light intensity and environmental temperature.            

2. Automatic classification and display function. It can be automatically classified according to the fixed voltage and current, and the results of the classification can be displayed directly on the test cabinet by digital display. Easy to use in production line.            

3. Solar cells are connected by four wires to ensure the current accuracy.            

4. Measuring temperature and light intensity at the same time to ensure the accuracy of automatic correction of solar cell temperature and light intensity.           

5. Self-tuning system with manual input compensation parameters, automatic/manual temperature compensation, automatic light intensity compensation, etc.


Got Free Inquiry Now
We will contact you as soon as possible!
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Related Products

Suposolar is a group company have been engaged in solar PV module manufacturing solutions for more than 15 years focus on serving small and medium factories in PV Industry.
100ms A+A+A+ Perc and Thin Film Cell Solar Module Simulator

100ms A+A+A+ Perc and Thin Film Cell Solar Module Simulator

100mS A+A+A+ Perc and Thin Film Cell Solar Module Simulator 

60mS AAA Perc Cell Solar Module Simulator

60mS AAA Perc Cell Solar Module Simulator

60mS AAA Perc Cell Solar Module Simulator 

AAA Sun Dimulator for Solar Panel Testing

AAA Sun Dimulator for Solar Panel Testing

YHMT-AAA  Solar Simulator 

Solar Simulator

AA Sun Dimulator for Solar Panel Testing

YHMT-AA  Solar Simulator 

Automatic Cell IV and appearance Sorting Machine

Automatic Cell IV and appearance Sorting Machine

Application: l 156mm-220mm poly crystalline and single crystal cells, warpage ≤ 3mm l 2-6BB 9BB 12BB poly crystalline and Mono Cell. l A Grade cells (Pass rate > 98%) Technical parameters: 1. Production capacity: the actual reference operating speed is 1500 pcs/ hour, and the average speed is about 2.4 seconds / tablet. (* it does not include the time of pick and place the cell,the speed is affected by the different test items and test accuracy, 2. Fragment rate: ≤ 0.05% (this parameter mainly refers to the damage caused by the machine itself, excluding the damage of raw materials) 3. Defective over judgment rate: about 6%. Calculation formula: A Grade cell is misjudged as B Grade/ Tested Qty 4. Missed rate: ≤ 0.3% . Calculation formula: Qty of missed Grade B / Tested Qty Technical Specification Equipment Name Automatic Cell IV and appearance Sorting Machine Model YH-ZDFX-2000 Method Offline IV color and appearance detection Function Automatically classify the color of the Cell and pick out the defects Cell Poly/Mono compatible Cell size 156×156 to  220×220 Camera 20Mega Pixels Thickness 0.16~0.22 Jig TYpe Loading 4 pcs load box(2 pcs regular、2 pcs backup) Unloading 16 pcs Unload Box Pperation capacity Speed 1500 pcs/Hrs( 2.4 s/Pcs) Running time(up time) ≥99% MTBF MTBF≥500 hrs MTTR MTTR≤1 hrs Power Voltage AC 220V;15A Rated Power 3KW Compress Air 0.6 ~0.8Mpa、 300L/Min, Tube OD 8mm Environment Humidity 20~40℃/ less than 85 RH%u cleanliness class 100000 clean area Noise ≤20dB Specification Gross Weight(KG) 800 Dimension 2200mm(L)×1200mm(W)×2000mm(H) Installation According to onsite situation Software Development Self-developed Upgrade Software free upgrade Component PLC Siemens Slide Hiwin Cylinder Airtac、SMC Solenoid valve SMC Motor Matsushita  Leadshine

Solar Simulator

AA Sun Dimulator for Solar Panel Testing

YHMT-AA  Solar Simulator 

chat Now Request A Free Quote
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!