Solar Cell Laser Scribing Machine 30W
Solar Cell Laser Scribing Machine for 50MW–150MW production lines, compatible with all mainstream solar cell sizes, including 182mm and 210mm cells.
Item NO.:
YHMT-AALead Time:
15 daysProduct Orgin:
ChinaShipping Port:
CHINA MAIN PORTPayment:
100% T/T in Advance.Color:
CustomizedSolar Simulator
The Solar Simulator is designed for automatic electrical performance testing and test data recording of monocrystalline silicon solar cells, polycrystalline silicon solar cells, and thin-film solar modules. It provides a reliable testing solution for photovoltaic manufacturers, supporting solar cell and solar module quality inspection, production testing, and performance evaluation.
Adjustable Flash Duration: The flash duration is continuously adjustable from 10 to 100 ms, allowing flexible configuration for different solar cell and module testing requirements.
High-Speed Data Acquisition: Equipped with a 14-bit, 4-channel high-speed synchronous data acquisition card and four-wire measurement technology, collecting up to 8,000 data points for electrical performance analysis.
Multi-Parameter Measurement and Display: Measures and displays up to 10 photovoltaic performance parameters. Test results can be presented in both tabular and graphical formats for convenient data analysis and evaluation.
Automatic Irradiance and Temperature Compensation: Features automatic irradiance and temperature compensation to help maintain consistent testing conditions and improve measurement accuracy.
Voice Alerts and Flash Counting: Provides audible operation prompts and automatic flash counting, making testing progress easier to monitor during production.
24-Hour Continuous Operation: Designed for continuous operation over 24 hours to support demanding photovoltaic manufacturing environments. The imported xenon lamp has a service life of up to 300,000 flashes.
Technical Data:
|
Model |
YHMT-AAA YHMT-AA |
|
Lamp Spectrum |
In line with IEC60904-9 and JISC8933(A Grade) |
|
Light Intensity |
100mW/cm2(continuous adjustable range20-120mW/cm2) |
|
Light intensity non-uniformity |
≤±2%[A] ±3% |
|
Instability degree of irradiation |
≤±2%[A] ±2% |
|
Test results consistency |
≤±0.5%[A] ±1% |
|
Test error of electrical properties |
≤2% |
|
Single flash time |
10ms-30ms 10ms |
|
Effective Test Range |
1200*2000nm /5W-300W |
|
Measuring Voltage |
0-100V(Resolution 1mV) |
|
Measuring current |
0-20A(Resolution 1mA) |
|
Environmental temperature |
15℃~30℃ |
|
Test Parameters |
Isc, Voc,Pmax, Vm,Im,FF,EFF,Temp,Rs,Rsh |
|
power |
220V/50Hz(60Hz) |
Equipment, machine configuration:
1. Test Host(With electronic load):1 set
2. Light source(With optical system):2 Pieces
3. PC:1 set
4. High-speed data collection A/D plant:1 piece
5. Dedicated measurement software:1 set
6. Test bench:1 set
7. Standard Battery(Compensation and correction for the irradiance uniformity measurements):1 piece
8. Size:2.64*1.48*1.2m (Host)+0.86*0.61*0.95m(Spare parts)
9. G.weight:400KGS+25KGS
Scan To Wechat
