YH-SFM Solar Panel Hydraulic Framing Machine

Solar Panel hydraulic Framing Machine

YH-2010 frame forming machine is mainly designed for the frame forming of solar panel and also for similar products in other businesses as well.

The frame forming machine consists of frame body, movable slide block, movable slide block of middle accessory frame, fixed slide block, pneumatic positioning lock, hydraulic station and operating control cabinet. The machine use the frame forming process of pneumatic locking, mechanical fine-tune the positioning, pneumatic driving frames, flattening and hydraulic riveting

process. No noise, steady performance, reasonable structure, safe and reliable.

Features:

The machine is suitable for aluminum alloy frame, corner site clearance fit with Corner rivet type connection and the interference with the riveting on corners.

The machine is suitable for a variety of size frame profiles (press heads can be equipped according to user requirements).

Mechanical fine-tuning positioning pneumatic locking can ensure accuracy of sizes of component structures.

Pneumatic flat surface flattening mechanism can ensure the flatness of the whole set.

Frame assembly and riveting combination in one process can lead the high production capacity.

Hydraulic riveting forming on four corners simultaneously lead stable product performance.

Technical parameters:

Minimum frame forming size:400mm × 400mm

Maximum frame forming size: 2000× 1000mm

Frame assembly accuracy: the tolerance of size difference between the opposite

ends is ± 1mm, the size difference between the diagonals is ± 1mm

Power Supply:380V

Aire pressure: 0.4Mpa-0.8Mpa

Hydraulic: Pressure 1.0Mpa-16Mpa

Ambient temperature:10 ℃ -60 ℃

Weight:1000KG

Dimension:3000 × 1650 × 1050 (mm)